org.eclipse.swt.layout.FormAttachment

public final class FormAttachment extends Object

Instances of this class are used to define the edges of a control within a FormLayout.

FormAttachments are set into the top, bottom, left, and right fields of the FormData for a control. For example:

                FormData data = new FormData();
                data.top = new FormAttachment(0,5);
                data.bottom = new FormAttachment(100,-5);
                data.left = new FormAttachment(0,5);
                data.right = new FormAttachment(100,-5);
                button.setLayoutData(data);

A FormAttachment defines where to attach the side of a control by using the equation, y = ax + b. The "a" term represents a fraction of the parent composite's width (from the left) or height (from the top). It can be defined using a numerator and denominator, or just a percentage value. If a percentage is used, the denominator is set to 100. The "b" term in the equation represents an offset, in points, from the attachment position. For example:

                FormAttachment attach = new FormAttachment (20, -5);

specifies that the side to which the FormAttachment object belongs will lie at 20% of the parent composite, minus 5 points.

Control sides can also be attached to another control. For example:

                FormAttachment attach = new FormAttachment (button, 10);

specifies that the side to which the FormAttachment object belongs will lie in the same position as the adjacent side of the button control, plus 10 points. The control side can also be attached to the opposite side of the specified control. For example:

                FormData data = new FormData ();
                data.left = new FormAttachment (button, 0, SWT.LEFT);

specifies that the left side of the control will lie in the same position as the left side of the button control. The control can also be attached in a position that will center the control on the specified control. For example:

                data.left = new FormAttachment (button, 0, SWT.CENTER);

specifies that the left side of the control will be positioned so that it is centered between the left and right sides of the button control. If the alignment is not specified, the default is to attach to the adjacent side.

Since:

2.0

See Also:

Field Summary

Fields

Modifier and Type

Field

Description

int

alignment

alignment specifies the alignment of the control side that is attached to a control.

Control

control

control specifies the control to which the control side is attached.

int

denominator

denominator specifies the denominator of the "a" term in the equation, y = ax + b, which defines the attachment.

int

numerator

numerator specifies the numerator of the "a" term in the equation, y = ax + b, which defines the attachment.

int

offset

offset specifies the offset, in points, of the control side from the attachment position.
Constructor Summary

Constructors

Constructor

Description

FormAttachment()

Constructs a new instance of this class.

FormAttachment(int numerator)

Constructs a new instance of this class given a numerator Since no denominator or offset is specified, the default is to treat the numerator as a percentage of the form, with a denominator of 100.

FormAttachment(int numerator, int offset)

Constructs a new instance of this class given a numerator and an offset.

FormAttachment(int numerator, int denominator, int offset)

Constructs a new instance of this class given a numerator and denominator and an offset.

FormAttachment(Control control)

Constructs a new instance of this class given a control.

FormAttachment(Control control, int offset)

Constructs a new instance of this class given a control and an offset.

FormAttachment(Control control, int offset, int alignment)

Constructs a new instance of this class given a control, an offset and an alignment.
Method Summary

Modifier and Type

Method

Description

String

toString()

Returns a string containing a concise, human-readable description of the receiver.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Field Details
- numerator
  
  public int numerator
  
  numerator specifies the numerator of the "a" term in the equation, y = ax + b, which defines the attachment.
- denominator
  
  public int denominator
  
  denominator specifies the denominator of the "a" term in the equation, y = ax + b, which defines the attachment. The default value is 100.
- offset
  
  public int offset
  
  offset specifies the offset, in points, of the control side from the attachment position. If the offset is positive, then the control side is offset to the right of or below the attachment position. If it is negative, then the control side is offset to the left of or above the attachment position. This is equivalent to the "b" term in the equation y = ax + b. The default value is 0.
- control
  
  public Control control
  
  control specifies the control to which the control side is attached.
- alignment
  
  public int alignment
  alignment specifies the alignment of the control side that is attached to a control.
  For top and bottom attachments, TOP, BOTTOM and CENTER are used. For left and right attachments, LEFT, RIGHT and CENTER are used. If any other case occurs, the default will be used instead.
  
  Possible values are:
  
  SWT.TOP: Attach the side to the top side of the specified control.
  
  SWT.BOTTOM: Attach the side to the bottom side of the specified control.
  
  SWT.LEFT: Attach the side to the left side of the specified control.
  
  SWT.RIGHT: Attach the side to the right side of the specified control.
  
  SWT.CENTER: Attach the side at a position which will center the control on the specified control.
  
  SWT.DEFAULT: Attach the side to the adjacent side of the specified control.
Constructor Details
- FormAttachment
  
  public FormAttachment()
  
  Constructs a new instance of this class. Since no numerator, denominator or offset is specified, the attachment is treated as a percentage of the form. The numerator is zero, the denominator is 100 and the offset is zero.
  
  Since:
  
  3.2
- FormAttachment
  
  public FormAttachment(int numerator)
  
  Constructs a new instance of this class given a numerator Since no denominator or offset is specified, the default is to treat the numerator as a percentage of the form, with a denominator of 100. The offset is zero.
  
  Parameters:
  
  numerator - the percentage of the position
  
  Since:
  
  3.0
- FormAttachment
  
  public FormAttachment(int numerator, int offset)
  
  Constructs a new instance of this class given a numerator and an offset. Since no denominator is specified, the default is to treat the numerator as a percentage of the form, with a denominator of 100.
  
  Parameters:
  
  numerator - the percentage of the position
  
  offset - the offset of the side from the position
- FormAttachment
  
  public FormAttachment(int numerator, int denominator, int offset)
  
  Constructs a new instance of this class given a numerator and denominator and an offset. The position of the side is given by the fraction of the form defined by the numerator and denominator.
  
  Parameters:
  
  numerator - the numerator of the position
  
  denominator - the denominator of the position
  
  offset - the offset of the side from the position
- FormAttachment
  
  public FormAttachment(Control control)
  
  Constructs a new instance of this class given a control. Since no alignment is specified, the default alignment is to attach the side to the adjacent side of the specified control. Since no offset is specified, an offset of 0 is used.
  
  Parameters:
  
  control - the control the side is attached to
- FormAttachment
  
  public FormAttachment(Control control, int offset)
  
  Constructs a new instance of this class given a control and an offset. Since no alignment is specified, the default alignment is to attach the side to the adjacent side of the specified control.
  
  Parameters:
  
  control - the control the side is attached to
  
  offset - the offset of the side from the control
- FormAttachment
  
  public FormAttachment(Control control, int offset, int alignment)
  
  Constructs a new instance of this class given a control, an offset and an alignment. The possible alignment values are:
  
  SWT.TOP
  
  the side will be attached to the top side of the specified control
  
  SWT.BOTTOM
  
  the side will be attached to the bottom side of the specified control
  
  SWT.LEFT
  
  the side will be attached to the left side of the specified control
  
  SWT.RIGHT
  
  the side will be attached to the right side of the specified control
  
  SWT.CENTER
  
  the side will be centered on the same side of the specified control
  
  SWT.DEFAULT
  
  the side will be attached to the adjacent side of the specified control
  
  Parameters:
  
  control - the control the side is attached to
  
  offset - the offset of the side from the control
  
  alignment - the alignment of the side to the control it is attached to, one of TOP, BOTTOM, LEFT, RIGHT, CENTER, or DEFAULT
Method Details
- toString
  
  public String toString()
  
  Returns a string containing a concise, human-readable description of the receiver.
  
  Overrides:
  
  toString in class Object
  
  Returns:
  
  a string representation of the FormAttachment

Class FormAttachment

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Details

numerator

denominator

offset

control

alignment

Constructor Details

FormAttachment

FormAttachment

FormAttachment

FormAttachment

FormAttachment

FormAttachment

FormAttachment

Method Details

toString