Class Combo
- All Implemented Interfaces:
Drawable
Combo
s are used in the same place
where a single selection List
widget could
be used but space is limited. A Combo
takes
less space than a List
widget and shows
similar information.
Note: Since Combo
s can contain both a list
and an editable text field, it is possible to confuse methods
which access one versus the other (compare for example,
clearSelection()
and deselectAll()
).
The API documentation is careful to indicate either "the
receiver's list" or the "the receiver's text field" to
distinguish between the two cases.
Note that although this class is a subclass of Composite
,
it does not make sense to add children to it, or set a layout on it.
- Styles:
- DROP_DOWN, READ_ONLY, SIMPLE
- Events:
- DefaultSelection, Modify, Selection, Verify, OrientationChange
Note: Only one of the styles DROP_DOWN and SIMPLE may be specified.
IMPORTANT: This class is not intended to be subclassed.
- See Also:
- Restriction:
- This class is not intended to be subclassed by clients.
-
Field Summary
Modifier and TypeFieldDescriptionstatic final int
the operating system limit for the number of characters that the text field in an instance of this class can holdFields inherited from class org.eclipse.swt.widgets.Widget
nativeZoom
-
Constructor Summary
-
Method Summary
Modifier and TypeMethodDescriptionvoid
Adds the argument to the end of the receiver's list.void
Adds the argument to the receiver's list at the given zero-relative index.void
addModifyListener
(ModifyListener listener) Adds the listener to the collection of listeners who will be notified when the receiver's text is modified, by sending it one of the messages defined in theModifyListener
interface.void
addSegmentListener
(SegmentListener listener) Adds a segment listener.void
addSelectionListener
(SelectionListener listener) Adds the listener to the collection of listeners who will be notified when the user changes the receiver's selection, by sending it one of the messages defined in theSelectionListener
interface.void
addVerifyListener
(VerifyListener listener) Adds the listener to the collection of listeners who will be notified when the receiver's text is verified, by sending it one of the messages defined in theVerifyListener
interface.protected void
Checks that this class can be subclassed.void
Sets the selection in the receiver's text field to an empty selection starting just before the first character.void
copy()
Copies the selected text.void
cut()
Cuts the selected text.void
deselect
(int index) Deselects the item at the given zero-relative index in the receiver's list.void
Deselects all selected items in the receiver's list.Returns a point describing the location of the caret relative to the receiver.int
Returns the character position of the caret.getItem
(int index) Returns the item at the given, zero-relative index in the receiver's list.int
Returns the number of items contained in the receiver's list.int
Returns the height of the area which would be used to display one of the items in the receiver's list.String[]
getItems()
Returns a (possibly empty) array ofString
s which are the items in the receiver's list.boolean
Returnstrue
if the receiver's list is visible, andfalse
otherwise.int
Returns the orientation of the receiver.Returns aPoint
whose x coordinate is the character position representing the start of the selection in the receiver's text field, and whose y coordinate is the character position representing the end of the selection.int
Returns the zero-relative index of the item which is currently selected in the receiver's list, or -1 if no item is selected.getText()
Returns a string containing a copy of the contents of the receiver's text field, or an empty string if there are no contents.int
Returns the height of the receivers's text field.int
Returns the maximum number of characters that the receiver's text field is capable of holding.int
Gets the number of items that are visible in the drop down portion of the receiver's list.int
Searches the receiver's list starting at the first item (index 0) until an item is found that is equal to the argument, and returns the index of that item.int
Searches the receiver's list starting at the given, zero-relative index until an item is found that is equal to the argument, and returns the index of that item.void
paste()
Pastes text from clipboard.void
remove
(int index) Removes the item from the receiver's list at the given zero-relative index.void
remove
(int start, int end) Removes the items from the receiver's list which are between the given zero-relative start and end indices (inclusive).void
Searches the receiver's list starting at the first item until an item is found that is equal to the argument, and removes that item from the list.void
Removes all of the items from the receiver's list and clear the contents of receiver's text field.void
removeModifyListener
(ModifyListener listener) Removes the listener from the collection of listeners who will be notified when the receiver's text is modified.void
removeSegmentListener
(SegmentListener listener) Removes the listener from the collection of listeners who will be notified when the receiver's text is modified.void
removeSelectionListener
(SelectionListener listener) Removes the listener from the collection of listeners who will be notified when the user changes the receiver's selection.void
removeVerifyListener
(VerifyListener listener) Removes the listener from the collection of listeners who will be notified when the control is verified.void
select
(int index) Selects the item at the given zero-relative index in the receiver's list.void
Sets the font that the receiver will use to paint textual information to the font specified by the argument, or to the default font for that kind of control if the argument is null.void
Sets the text of the item in the receiver's list at the given zero-relative index to the string argument.void
Sets the receiver's list to be the given array of items.void
setListVisible
(boolean visible) Marks the receiver's list as visible if the argument istrue
, and marks it invisible otherwise.void
setOrientation
(int orientation) Sets the orientation of the receiver, which must be one of the constantsSWT.LEFT_TO_RIGHT
orSWT.RIGHT_TO_LEFT
.void
setSelection
(Point selection) Sets the selection in the receiver's text field to the range specified by the argument whose x coordinate is the start of the selection and whose y coordinate is the end of the selection.void
Sets the contents of the receiver's text field to the given string.void
setTextLimit
(int limit) Sets the maximum number of characters that the receiver's text field is capable of holding to be the argument.void
setVisibleItemCount
(int count) Sets the number of items that are visible in the drop down portion of the receiver's list.Methods inherited from class org.eclipse.swt.widgets.Composite
changed, drawBackground, getBackgroundMode, getChildren, getLayout, getLayoutDeferred, getTabList, isLayoutDeferred, layout, layout, layout, layout, layout, setBackgroundMode, setFocus, setLayout, setLayoutDeferred, setTabList, toString
Methods inherited from class org.eclipse.swt.widgets.Scrollable
computeTrim, getClientArea, getHorizontalBar, getScrollbarsMode, getVerticalBar, setScrollbarsMode
Methods inherited from class org.eclipse.swt.widgets.Control
addControlListener, addDragDetectListener, addFocusListener, addGestureListener, addHelpListener, addKeyListener, addMenuDetectListener, addMouseListener, addMouseMoveListener, addMouseTrackListener, addMouseWheelListener, addPaintListener, addTouchListener, addTraverseListener, computeSize, computeSize, dragDetect, dragDetect, forceFocus, getAccessible, getBackground, getBackgroundImage, getBorderWidth, getBounds, getCursor, getDragDetect, getEnabled, getFont, getForeground, getLayoutData, getLocation, getMenu, getMonitor, getParent, getRegion, getShell, getSize, getTextDirection, getToolTipText, getTouchEnabled, getVisible, internal_dispose_GC, internal_new_GC, isEnabled, isFocusControl, isReparentable, isVisible, moveAbove, moveBelow, pack, pack, print, redraw, redraw, removeControlListener, removeDragDetectListener, removeFocusListener, removeGestureListener, removeHelpListener, removeKeyListener, removeMenuDetectListener, removeMouseListener, removeMouseMoveListener, removeMouseTrackListener, removeMouseWheelListener, removePaintListener, removeTouchListener, removeTraverseListener, requestLayout, setBackground, setBackgroundImage, setBounds, setBounds, setCapture, setCursor, setDragDetect, setEnabled, setForeground, setLayoutData, setLocation, setLocation, setMenu, setParent, setRedraw, setRegion, setSize, setSize, setTextDirection, setToolTipText, setTouchEnabled, setVisible, toControl, toControl, toDisplay, toDisplay, traverse, traverse, traverse, update
Methods inherited from class org.eclipse.swt.widgets.Widget
addDisposeListener, addListener, addTypedListener, checkWidget, dispose, getData, getData, getDisplay, getListeners, getStyle, getTypedListeners, isAutoDirection, isDisposed, isListening, notifyListeners, removeDisposeListener, removeListener, removeListener, removeTypedListener, reskin, setData, setData
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait
Methods inherited from interface org.eclipse.swt.graphics.Drawable
isAutoScalable
-
Field Details
-
LIMIT
public static final int LIMITthe operating system limit for the number of characters that the text field in an instance of this class can hold
-
-
Constructor Details
-
Combo
Constructs a new instance of this class given its parent and a style value describing its behavior and appearance.The style value is either one of the style constants defined in class
SWT
which is applicable to instances of this class, or must be built by bitwise OR'ing together (that is, using theint
"|" operator) two or more of thoseSWT
style constants. The class description lists the style constants that are applicable to the class. Style bits are also inherited from superclasses.- Parameters:
parent
- a composite control which will be the parent of the new instance (cannot be null)style
- the style of control to construct- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the parent is null
SWTException
-- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the parent
- ERROR_INVALID_SUBCLASS - if this class is not an allowed subclass
- See Also:
-
-
Method Details
-
add
Adds the argument to the end of the receiver's list.Note: If control characters like '\n', '\t' etc. are used in the string, then the behavior is platform dependent.
- Parameters:
string
- the new item- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the string is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
add
Adds the argument to the receiver's list at the given zero-relative index.Note: To add an item at the end of the list, use the result of calling
getItemCount()
as the index or useadd(String)
.Also note, if control characters like '\n', '\t' etc. are used in the string, then the behavior is platform dependent.
- Parameters:
string
- the new itemindex
- the index for the item- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the string is null
- ERROR_INVALID_RANGE - if the index is not between 0 and the number of elements in the list (inclusive)
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
addModifyListener
Adds the listener to the collection of listeners who will be notified when the receiver's text is modified, by sending it one of the messages defined in theModifyListener
interface.- Parameters:
listener
- the listener which should be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
addSegmentListener
Adds a segment listener.A
SegmentEvent
is sent whenever text content is being modified or a segment listener is added or removed. You can customize the appearance of text by indicating certain characters to be inserted at certain text offsets. This may be used for bidi purposes, e.g. when adjacent segments of right-to-left text should not be reordered relative to each other. E.g., multiple Java string literals in a right-to-left language should generally remain in logical order to each other, that is, the way they are stored.Warning: This API is currently only implemented on Windows.
SegmentEvent
s won't be sent on GTK and Cocoa.- Parameters:
listener
- the listener which should be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.103
- See Also:
-
addSelectionListener
Adds the listener to the collection of listeners who will be notified when the user changes the receiver's selection, by sending it one of the messages defined in theSelectionListener
interface.widgetSelected
is called when the user changes the combo's list selection.widgetDefaultSelected
is typically called when ENTER is pressed the combo's text area.- Parameters:
listener
- the listener which should be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
addVerifyListener
Adds the listener to the collection of listeners who will be notified when the receiver's text is verified, by sending it one of the messages defined in theVerifyListener
interface.- Parameters:
listener
- the listener which should be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.1
- See Also:
-
checkSubclass
protected void checkSubclass()Description copied from class:Widget
Checks that this class can be subclassed.The SWT class library is intended to be subclassed only at specific, controlled points (most notably,
Composite
andCanvas
when implementing new widgets). This method enforces this rule unless it is overridden.IMPORTANT: By providing an implementation of this method that allows a subclass of a class which does not normally allow subclassing to be created, the implementer agrees to be fully responsible for the fact that any such subclass will likely fail between SWT releases and will be strongly platform specific. No support is provided for user-written classes which are implemented in this fashion.
The ability to subclass outside of the allowed SWT classes is intended purely to enable those not on the SWT development team to implement patches in order to get around specific limitations in advance of when those limitations can be addressed by the team. Subclassing should not be attempted without an intimate and detailed understanding of the hierarchy.
- Overrides:
checkSubclass
in classComposite
-
clearSelection
public void clearSelection()Sets the selection in the receiver's text field to an empty selection starting just before the first character. If the text field is editable, this has the effect of placing the i-beam at the start of the text.Note: To clear the selected items in the receiver's list, use
deselectAll()
.- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
copy
public void copy()Copies the selected text.The current selection is copied to the clipboard.
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 2.1
-
cut
public void cut()Cuts the selected text.The current selection is first copied to the clipboard and then deleted from the widget.
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 2.1
-
deselect
public void deselect(int index) Deselects the item at the given zero-relative index in the receiver's list. If the item at the index was already deselected, it remains deselected. Indices that are out of range are ignored.- Parameters:
index
- the index of the item to deselect- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
deselectAll
public void deselectAll()Deselects all selected items in the receiver's list.Note: To clear the selection in the receiver's text field, use
clearSelection()
.- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
getCaretLocation
Returns a point describing the location of the caret relative to the receiver.- Returns:
- a point, the location of the caret
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.8
-
getCaretPosition
public int getCaretPosition()Returns the character position of the caret.Indexing is zero based.
- Returns:
- the position of the caret
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.8
-
getItem
Returns the item at the given, zero-relative index in the receiver's list. Throws an exception if the index is out of range.- Parameters:
index
- the index of the item to return- Returns:
- the item at the given index
- Throws:
IllegalArgumentException
-- ERROR_INVALID_RANGE - if the index is not between 0 and the number of elements in the list minus 1 (inclusive)
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getItemCount
public int getItemCount()Returns the number of items contained in the receiver's list.- Returns:
- the number of items
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getItemHeight
public int getItemHeight()Returns the height of the area which would be used to display one of the items in the receiver's list.- Returns:
- the height of one item
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getItems
Returns a (possibly empty) array ofString
s which are the items in the receiver's list.Note: This is not the actual structure used by the receiver to maintain its list of items, so modifying the array will not affect the receiver.
- Returns:
- the items in the receiver's list
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getListVisible
public boolean getListVisible()Returnstrue
if the receiver's list is visible, andfalse
otherwise.If one of the receiver's ancestors is not visible or some other condition makes the receiver not visible, this method may still indicate that it is considered visible even though it may not actually be showing.
- Returns:
- the receiver's list's visibility state
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.4
-
setListVisible
public void setListVisible(boolean visible) Marks the receiver's list as visible if the argument istrue
, and marks it invisible otherwise.If one of the receiver's ancestors is not visible or some other condition makes the receiver not visible, marking it visible may not actually cause it to be displayed.
- Parameters:
visible
- the new visibility state- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.4
-
getOrientation
public int getOrientation()Returns the orientation of the receiver.- Overrides:
getOrientation
in classControl
- Returns:
- the orientation style
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 2.1.2
-
getSelection
Returns aPoint
whose x coordinate is the character position representing the start of the selection in the receiver's text field, and whose y coordinate is the character position representing the end of the selection. An "empty" selection is indicated by the x and y coordinates having the same value.Indexing is zero based. The range of a selection is from 0..N where N is the number of characters in the widget.
- Returns:
- a point representing the selection start and end
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getSelectionIndex
public int getSelectionIndex()Returns the zero-relative index of the item which is currently selected in the receiver's list, or -1 if no item is selected.- Returns:
- the index of the selected item
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getText
Returns a string containing a copy of the contents of the receiver's text field, or an empty string if there are no contents.- Returns:
- the receiver's text
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getTextHeight
public int getTextHeight()Returns the height of the receivers's text field.- Returns:
- the text height
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
getTextLimit
public int getTextLimit()Returns the maximum number of characters that the receiver's text field is capable of holding. If this has not been changed bysetTextLimit()
, it will be the constantCombo.LIMIT
.- Returns:
- the text limit
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
getVisibleItemCount
public int getVisibleItemCount()Gets the number of items that are visible in the drop down portion of the receiver's list.Note: This operation is a hint and is not supported on platforms that do not have this concept.
- Returns:
- the number of items that are visible
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.0
-
indexOf
Searches the receiver's list starting at the first item (index 0) until an item is found that is equal to the argument, and returns the index of that item. If no item is found, returns -1.- Parameters:
string
- the search item- Returns:
- the index of the item
- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the string is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
indexOf
Searches the receiver's list starting at the given, zero-relative index until an item is found that is equal to the argument, and returns the index of that item. If no item is found or the starting index is out of range, returns -1.- Parameters:
string
- the search itemstart
- the zero-relative index at which to begin the search- Returns:
- the index of the item
- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the string is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
paste
public void paste()Pastes text from clipboard.The selected text is deleted from the widget and new text inserted from the clipboard.
- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 2.1
-
remove
public void remove(int index) Removes the item from the receiver's list at the given zero-relative index.- Parameters:
index
- the index for the item- Throws:
IllegalArgumentException
-- ERROR_INVALID_RANGE - if the index is not between 0 and the number of elements in the list minus 1 (inclusive)
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
remove
public void remove(int start, int end) Removes the items from the receiver's list which are between the given zero-relative start and end indices (inclusive).- Parameters:
start
- the start of the rangeend
- the end of the range- Throws:
IllegalArgumentException
-- ERROR_INVALID_RANGE - if either the start or end are not between 0 and the number of elements in the list minus 1 (inclusive)
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
remove
Searches the receiver's list starting at the first item until an item is found that is equal to the argument, and removes that item from the list.- Parameters:
string
- the item to remove- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the string is null
- ERROR_INVALID_ARGUMENT - if the string is not found in the list
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
removeAll
public void removeAll()Removes all of the items from the receiver's list and clear the contents of receiver's text field.- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
removeModifyListener
Removes the listener from the collection of listeners who will be notified when the receiver's text is modified.- Parameters:
listener
- the listener which should no longer be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
removeSegmentListener
Removes the listener from the collection of listeners who will be notified when the receiver's text is modified.- Parameters:
listener
- the listener which should no longer be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.103
- See Also:
-
removeSelectionListener
Removes the listener from the collection of listeners who will be notified when the user changes the receiver's selection.- Parameters:
listener
- the listener which should no longer be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
removeVerifyListener
Removes the listener from the collection of listeners who will be notified when the control is verified.- Parameters:
listener
- the listener which should no longer be notified- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the listener is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.1
- See Also:
-
select
public void select(int index) Selects the item at the given zero-relative index in the receiver's list. If the item at the index was already selected, it remains selected. Indices that are out of range are ignored.- Parameters:
index
- the index of the item to select- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
setFont
Description copied from class:Control
Sets the font that the receiver will use to paint textual information to the font specified by the argument, or to the default font for that kind of control if the argument is null. -
setItem
Sets the text of the item in the receiver's list at the given zero-relative index to the string argument.- Parameters:
index
- the index for the itemstring
- the new text for the item- Throws:
IllegalArgumentException
-- ERROR_INVALID_RANGE - if the index is not between 0 and the number of elements in the list minus 1 (inclusive)
- ERROR_NULL_ARGUMENT - if the string is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
setItems
Sets the receiver's list to be the given array of items.- Parameters:
items
- the array of items- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the items array is null
- ERROR_INVALID_ARGUMENT - if an item in the items array is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
setOrientation
public void setOrientation(int orientation) Sets the orientation of the receiver, which must be one of the constantsSWT.LEFT_TO_RIGHT
orSWT.RIGHT_TO_LEFT
.- Overrides:
setOrientation
in classControl
- Parameters:
orientation
- new orientation style- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 2.1.2
-
setSelection
Sets the selection in the receiver's text field to the range specified by the argument whose x coordinate is the start of the selection and whose y coordinate is the end of the selection.- Parameters:
selection
- a point representing the new selection start and end- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the point is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
setText
Sets the contents of the receiver's text field to the given string.This call is ignored when the receiver is read only and the given string is not in the receiver's list.
Note: The text field in a
Combo
is typically only capable of displaying a single line of text. Thus, setting the text to a string containing line breaks or other special characters will probably cause it to display incorrectly.Also note, if control characters like '\n', '\t' etc. are used in the string, then the behavior is platform dependent.
- Parameters:
string
- the new text- Throws:
IllegalArgumentException
-- ERROR_NULL_ARGUMENT - if the string is null
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
-
setTextLimit
public void setTextLimit(int limit) Sets the maximum number of characters that the receiver's text field is capable of holding to be the argument.To reset this value to the default, use
setTextLimit(Combo.LIMIT)
. Specifying a limit value larger thanCombo.LIMIT
sets the receiver's limit toCombo.LIMIT
.- Parameters:
limit
- new text limit- Throws:
IllegalArgumentException
-- ERROR_CANNOT_BE_ZERO - if the limit is zero
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- See Also:
-
setVisibleItemCount
public void setVisibleItemCount(int count) Sets the number of items that are visible in the drop down portion of the receiver's list.Note: This operation is a hint and is not supported on platforms that do not have this concept.
- Parameters:
count
- the new number of items to be visible- Throws:
SWTException
-- ERROR_WIDGET_DISPOSED - if the receiver has been disposed
- ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
- Since:
- 3.0
-