public abstract class EditorPart extends WorkbenchPart implements IEditorPart
This class should be subclassed by clients wishing to define new editors.
The name of the subclass should be given as the
attribute in a
editor extension contributed to the workbench's
view extension point (named
For example, the plug-in's XML markup might contain:
<extension point="org.eclipse.ui.editors"> <editor id="com.example.myplugin.ed" name="My Editor" icon="./images/cedit.gif" extensions="foo" class="com.example.myplugin.MyFooEditor" contributorClass="com.example.myplugin.MyFooEditorContributor" /> </extension>where
com.example.myplugin.MyEditoris the name of the
Subclasses must implement the following methods:
IEditorPart.init- to initialize editor when assigned its site
IWorkbenchPart.createPartControl- to create the editor's controls
IWorkbenchPart.setFocus- to accept focus
IEditorPart.isDirty- to decide whether a significant change has occurred
IEditorPart.doSave- to save contents of editor
IEditorPart.doSaveAs- to save contents of editor
IEditorPart.isSaveAsAllowed- to control Save As
Subclasses may extend or reimplement the following methods as required:
IExecutableExtension.setInitializationData- extend to provide additional initialization when editor extension is instantiated
IWorkbenchPart.dispose- extend to provide additional cleanup
IAdaptable.getAdapter- reimplement to make the editor adaptable
|Modifier||Constructor and Description|
Creates a new workbench editor.
|Modifier and Type||Method and Description|
Checks that the given site is valid for this type of part.
Saves the contents of this part.
Saves the contents of this part to another object.
Returns the input for this editor.
Returns the site for this editor.
Returns the title tool tip text of this workbench part.
Initializes this editor with the given editor site and input.
Returns whether the contents of this part have changed since the last save operation.
Returns whether the "Save As" operation is supported by this part.
Returns whether the contents of this part should be saved when the part is closed.
Sets the content description for this part.
This method is called by the implementation of the method
Sets the input to this editor.
Sets the input to this editor and fires a PROP_INPUT property change if the input has changed.
Sets the name of this part.
addPartPropertyListener, addPropertyListener, createPartControl, dispose, firePartPropertyChanged, firePropertyChange, getAdapter, getConfigurationElement, getContentDescription, getDefaultImage, getOrientation, getPartName, getPartProperties, getPartProperty, getSite, getTitle, getTitleImage, removePartPropertyListener, removePropertyListener, setFocus, setPartProperty, setSite, setTitle, setTitleImage, setTitleToolTip, showBusy
addListenerObject, clearListeners, getListeners, isListenerAttached, removeListenerObject
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
addPropertyListener, createPartControl, dispose, getSite, getTitle, getTitleImage, removePropertyListener, setFocus
public abstract void doSave(IProgressMonitor monitor)
If the save is successful, the part should fire a property changed event
reflecting the new dirty state (
If the save is cancelled through user action, or for any other reason, the
part should invoke
setCancelled on the
to inform the caller.
This method is long-running; progress and cancellation are provided by the given progress monitor.
public abstract void doSaveAs()
Implementors are expected to open a "Save As" dialog where the user will
be able to select a new name for the contents. After the selection is made,
the contents should be saved to that new name. During this operation a
IProgressMonitor should be used to indicate progress.
If the save is successful, the part fires a property changed event
reflecting the new dirty state (
public IEditorInput getEditorInput()
public IEditorSite getEditorSite()
The site can be
null while the editor is being initialized.
After the initialization is complete, this value must be non-
for the remainder of the editor's life cycle.
public String getTitleToolTip()
The tool tip text is used to populate the title bar of this part's visual container.
public abstract void init(IEditorSite site, IEditorInput input) throws PartInitException
This method is automatically called shortly after the part is instantiated.
It marks the start of the part's lifecycle. The
IWorkbenchPart.dispose method will be called
automically at the end of the lifecycle. Clients must not call this method.
Implementors of this method must examine the editor input object type to
determine if it is understood. If not, the implementor must throw
public abstract boolean isDirty()
Note: this method is called often on a part open or part activation switch, for example by actions to determine their enabled status.
public abstract boolean isSaveAsAllowed()
public boolean isSaveOnCloseNeeded()
protected void setInput(IEditorInput input)
Unlike most of the other set methods on this class, this method does not fire a property change. Clients that call this method from a subclass must ensure that they fire an IWorkbenchPartConstants.PROP_INPUT property change after calling this method but before leaving whatever public method they are in. Clients that expose this method as public API must fire the property change within their implementation of setInput.
Note that firing a property change may cause listeners to immediately reach back and call methods on this editor. Care should be taken not to fire the property change until the editor has fully updated its internal state to reflect the new input.
input- the editor input
protected void setInputWithNotify(IEditorInput input)
Note that firing a property change may cause other objects to reach back and invoke methods on the editor. Care should be taken not to call this method until the editor has fully updated its internal state to reflect the new input.
input- the editor input
protected void setContentDescription(String description)
This may overwrite a value that was previously set in setTitle
protected void setPartName(String partName)
setPartName and setContentDescription are intended to replace setTitle. This may change a value that was previously set using setTitle.
public void setInitializationData(IConfigurationElement cfig, String propertyName, Object data)
IConfigurationElement.createExecutableExtensionon a newly constructed extension, passing it its relevant configuration information. Most executable extensions only make use of the first two call arguments.
Regular executable extensions specify their Java implementation class name as an attribute of the configuration element for the extension. For example
<action run="com.example.BaseAction"/>In the above example, this method would be called with a reference to the
<action>element (first argument), and
"run"as the name of the attribute that defined this executable extension (second argument).
The last parameter is for the specific use of extension adapters and is typically not used by regular executable extensions.
There are two supported ways of associating additional adapter-specific data with the configuration in a way that is transparent to the extension point implementor:
(1) by specifying adapter data as part of the implementation
class attribute value. The Java class name can be followed
by a ":" separator, followed by any adapter data in string
form. For example, if the extension point specifies an attribute
"run" to contain the name of the extension implementation,
an adapter can be configured as
<action run="com.example.ExternalAdapter:./cmds/util.exe -opt 3"/>
(2) by converting the attribute used to specify the executable extension to a child element of the original configuration element, and specifying the adapter data in the form of xml markup. Using this form, the example above would become
runclass="com.xyz.ExternalAdapter"> <parameter name="exec" value="./cmds/util.exe"/> <parameter name="opt" value="3"/> </ run> </action>
Form (2) will typically only be used for extension points that anticipate the majority of extensions configured into it will in fact be in the form of adapters.
In either case, the specified adapter class is instantiated using its 0-argument public constructor. The adapter data is passed as the last argument of this method. The data argument is defined as Object. It can have the following values:
null, if no adapter data was supplied
Hashtablecontaining the actual parameter names and values (both
WorkbenchPartimplementation of this
IExecutableExtensionrecords the configuration element in and internal state variable (accessible via
getConfigElement). It also loads the title image, if one is specified in the configuration element. Subclasses may extend. Should not be called by clients. It is called by the core plugin when creating this executable extension.
cfig- the configuration element used to trigger this execution. It can be queried by the executable extension for specific configuration properties
propertyName- the name of an attribute of the configuration element used on the
createExecutableExtension(String)call. This argument can be used in the cases where a single configuration element is used to define multiple executable extensions.
data- adapter data in the form of a
Copyright (c) 2000, 2017 Eclipse Contributors and others. All rights reserved.Guidelines for using Eclipse APIs.